Highlighted Unit: ALY101-05-S

• Compliance Measurement: Accurately measure and verify gas purity for SF6, SO2, and dew-point per CEI EN 60480 standards 

• Portable Design: Half the weight and size of traditional analyzers, ensuring easy transport and handling (Weight: 14kg, Dimensions: Length: 366 mm - Width: 464 mm - Height 176 mm)

• Flexible Power Options: Operates without a built-in battery; making it airline-friendly for travel.

• Smart Monitoring: Access and control analyses in real time via your smartphone or tablet, enhancing workflow efficiency

• Easy Maintenance:  Replacing sensors is quick and easy, where it can be be done onsite in minutes by swapping out old sensors with new pre-calibrated sensors, fully minimizing downtime. Comes with Calibration Certificate.

Highlighted Unit: Synergic Series (multiple versions available)

• 4 simultaneous functions in one cart: Air Vacuum, Recovery, Refill of SF6 gas and Filtering

• Liquid state recovery and storage in the connected tank up to 50 bar pressure, achieving final absolute pressure of less than 1 mbar (Compliant with CEI EN62271-4)

• Air Evacuation: Final attainable absolute pressure in compartment < 1 mbar abs

• Recycling in autonomy: the integrated filter allows the reduction of humidity levels and the elimination of gases resulting from the decomposition of SF6

• All connections are molecular sealed

• Smartphone and tablet control enabled

• Calibration certificates for safety valves and refilling digital pressure gauge included

Highlighted Unit: Easy Series CAR103-01 (multiple versions available)

• Compact design with remote access supported. Standard equipment includes:

  • Air vacuum pump 40 Nm3/h

  • SF6 gas vacuum pump 15 Nm3/h

  • SF6 dry compressor 13.5 Nm3/h

  • 2 humidity filters & 1 particulate filter

  • 12” digital display, remote control fully supported 

  • Pressure, humidity and temperature sensor

  • Precision vacuometer 0-100 mbar

  • Solid elastic rubber wheels with swivel plate support and brake with emptying cylinder for transport

Highlighted Unit: ACTIVE​ (ACC101-03) 

• Designed to Dehumidify, Dedust and Eliminate the acidic substances

• Plug & Play: Thanks to coupling valves installed both at the inlet and at the outlet of the vessel, it is possible to replace the filter by disassembling it directly from the System, even during operation, without the need to remove the gas inside it..

• Full gas Recycle according to IEC standards both when the plan is operating and while shut down

• ​Certified according to the Pressure Equipment Directive (PED 2014/68/EC)

• Ideal for full Recycling of SF6 gas contained in all equipment sizes 

Highlighted Unit: SF6 Full Gas Analyzer (ALY101-06)

• Accurately measure gas purity by measuring SF6, SO2, CO, H2S, HF, and dew-point per CEI EN 60480

• The absence of SF6 gas leaks is guaranteed by a closed-loop system

• Internal rechargeable battery for different analyses with a single charge - can also be used while plugged in

• Analyzed gas is stored inside the analyzer in an internal bag, and can be easily returned to the compartment through the pump-back function by pressing a button on the equipment

• Weighs 24kg and is equipped with wheels for easy transportation

• All testing results can easily be downloaded via USB stick 

• For users requiring less testing parameters, the ALY101-05 is available, which measures SF6, dew-point and SO2.

Highlighted Unit: LEK103-03

• Equipment weights 2.8kg, and is ideal for detection and exact quantification of leaks in equipment containing SF6 gas

• Audible and visual alarms with easy to read display

• Precise localization of the leak where the SF6 concentration in the air is higher

• Calibration is recommended every 2 years - and can be done locally in Hong Kong

• Key Technical Specs: ACCURACY: 2 gr/y | RESOLUTION: 1 ppmv | MEASURING RANGE: 0-1000 ppmv | REPEATABILITY: ≤ ±0,2% | DETECTION LIMIT: 1 ppmv (3g/year) |  RESPONSE TIME: ~ 1 sec

Highlighted Unit: LEK102-02

• The SF6 Sniffer by Synecom is a portable instrument capable of performing SF6 leak detection

• Max sensitivity of 5ppm, 6-hours battery life and sensor life of 10 years 

• The detector can automatically adapt the measurement range in relation to the various concentrations of gas present in the detection site.

• Audible & visible alarms

• Automatic adjustment of measuring range

Highlighted Unit: VPU101-01

• Ideal for: Air vacuuming of the equipment until a final pressure value of 1 mbar

• A precision vacuum gauge connected to the display allows the monitoring of the pressure from 100 mbar to < 1 mbar

• The solenoid valve avoids operating errors: 1. closes at every power failure or pump stop 2. stay close in case of connection of a overpressured hose (>1,5 bar abs)

• Available in 4 versions to meet different needs

Highlighted Unit: FLOW VO (REF102-01) ...other models available

• SF6 Filling Unit FLOW V0 enables a compartment to be filled from a cylinder.

• The pressure reducer ensures the regulation of the outlet gas pressure.

• The device is equipped with an inlet pressure gauge that monitors the pressure of the gas in the cylinder and an outlet pressure gauge that monitors the pressure of the gas entering the compartment.